Measuring a window for blinds is an important step to ensure that the blinds fit properly and provide effective coverage. Here's a step-by-step guide on how to measure a window for blinds:
Tools You'll Need:
- Measuring tape
- Pen and paper to record measurements
Step 1: Decide Where to Mount the Blinds
Determine whether you want to mount the blinds inside the window frame (inside mount) or outside the frame (outside mount). The choice will affect your measurements. Inside mounts provide a sleek, integrated look, while outside mounts offer more coverage.
Step 2: Inside Mount Measurement
If you've chosen an inside mount, follow these steps:
-
Measure the width of the window frame at the top, middle, and bottom. Use the narrowest measurement as the width for your blinds. This ensures the blinds fit without scraping the sides of the window frame.
-
Measure the height from the top of the window frame to the windowsill in three places: left, center, and right. Use the longest measurement as the height for your blinds. This allows the blinds to fully cover the window.
Step 3: Outside Mount Measurement
If you've opted for an outside mount, follow these steps:
-
Measure the width of the window frame or the area you want the blinds to cover. Decide how much you want the blinds to extend beyond the window frame (usually 2-4 inches on each side is a good rule of thumb for an outside mount).
-
Measure the height from the top of the window frame to the desired location for the bottom of the blinds. This is usually just above the windowsill or where you want the blinds to end.
Step 4: Record Your Measurements
Write down the exact measurements for the width and height based on the type of mount you've chosen.
Step 6: Double-Check Your Measurements
Before finalizing your order, double-check your measurements to ensure accuracy. Small errors can lead to poorly fitting blinds, so it's important to be precise.
